![]() |
管件產品生產設備 Pipe Fittings Produce Machine |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
全自動型液壓中頻彎管機設有機械部分和電器控製部分。 中頻彎管機機械部分設有4大機構分別為動力源機構、夾緊固定機構、彎管彎曲半徑調節機械、推進機構。
中頻彎管機電器部分由2大係統組成分別為加熱係統和PLC控製係統 。
Automatic type hydraulic if pipe bender is equipped with mechanical part and electric controlling part. Mechanical part has four institutions: Power supply mechanism, clamp fixed institution, bend radius adjusting mechanism, feed mechanism.
Electrical part of If pipe
bending machine consists of two systems: Heating system and PLC
control system.
The Siemens S7-200, using the industrial computer or touch screen , We
developed a set of automatic control system from year 1994
according to the bending process : - Put the required bend
geometry size, bending radius, bend Angle and raw material
Numbers, material, heating required temperature and a series of
data into the computer, let the computer has automatic tracking
control according to those data, complete the tube bending
process . |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
彎頭機組成部分:彎頭推製機主機、液壓泵站、操作台、電機控製櫃、中頻電源、補償電容器、水電纜、中頻線圈調整架、電抗器。 彎頭機可推製最大口徑為Φ1420mm的彎頭。 彎頭機設備優點: 1.彎頭機加熱電源部分——恒功率輸出。采用獨有的穩壓技術,即使進線電壓波動10%,仍能保持中頻輸出功率穩定。節能環保、噪音小,汙染小。 2.彎頭機采用液壓自動上料機構。 3.彎頭機閘門采用液壓開閉。 4.彎頭機線圈支架上下,前後,擺動采用電機調整,操作更安全。 5.彎頭機根據設備需要采用二支或四支油缸推製,設備運行更平穩。 Constituent parts of elbow formingmachine: Main machine, hydraulic powerstation, operation desk, motor control cabinet,medium frequency power supply, compensatingcapacitor, water cable, adjustable holder ofinduction coil and reactor. The elbow forming machine canmake elbow size upto Φ1420mm . The elbow forming machine hasfollowing advantages: 1. The elbow formingmachine heating powersection---Constant power output. Using theunique stabilized voltage technology, eventhough the input voltage has 10% of fluctuation,can still keep the stability of intermediatefrequency output power. Energy saving andenvironmental protection, noise and pollution issmall. 2. The elbow formingmachine adopts hydraulic automaticfeeding mechanism. 3. The elbow formingmachine lock gate adopts hydraulic openand close. 4. The elbow formingmachine induction coil holder up anddown, front and back actions adjustable bymotor, operating is safer. 5. The elbow formingmachine uses 2 cylinders
or 4 cylindersaccording to the requirement of the machine,running
more smoothly. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
冷拔三通機 Cold Draw Tee Machine | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EDW係列冷擠三通機適用於Φ21-426mm的不鏽鋼及碳鋼三通管件。
EDW Series of cold extrusion teeforming
machine are suitable for carbon andstainless steel pipe
fitting teeforming(Φ21-630mm).
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
擴管機是針對大直徑無縫鋼管生產量不足和規格不全而設計的。該設備為雙油缸或四油缸平行均速推製機,泵站閥台采用集成形式。按擴製鋼管的外徑及長度,設置中頻加熱電源的功率、油缸的推力及行程。 The expanding machine isdesigned due to the insufficiency of largediameter seamless steel tube production andspecification. It’s a two oil cylinder or fouroil cylinder parallel uniform velocity pushingmachine, pump station valve table adoptsintegrated form. Setting the power of mediumfrequency heating power supply, force and strokeof oil cylinder according to the outer diameterand length of the pipe. The expanding machine hasfollowing parts: Main machine, automatic feedingand unloading material system, hydraulic pumpstation, operation desk, motor control cabinet,medium frequency power supply, compensatingcapacitor, water cable, adjustable holder ofinduction coil and reactor. The expanding machinemaximum expanding range: pipe diameter
Φ 1520mm, wall thickness 120 mm. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
壓力機的工作環境: 1、溫度:0℃ ~40℃. 2、濕度:相對濕度90%以下。 3、電壓:380V(-15%、+15%)、50Hz。 壓力機用途:適用範圍:機器適用於可塑性材料的壓製工藝,如翻邊、薄板拉伸、彎曲等,也可從事校正、壓裝、冷擠、塑料製品及粉末製品的壓製成型工藝。 壓力機主要特點:1、壓力機結構采用計算機優化設計、結構簡單、經濟實用。 2、壓力機液壓控製采用集成係統,動作可靠、使用壽命長、液壓衝擊小、並減少連接管路與泄漏點,液壓集成係統采用獨立控製單元。 3、壓力機獨立的電氣控製係統,工作可靠、動作直觀、維修方便。範圍:最大能生產2500T壓力機。 另外我廠生產的壓力機遠銷印度、俄羅斯等國家.
1,Hydraulic presses machine tool workingenvironment: 1. Temperature: 0 ℃ to 40 ℃. 2. Humidity: relative humiditybelow 90%. 3. Voltage: 380 v (15% and +15%), 50 Hz. Application: Used for pressingtechnology of plasticity material, Such asflanging, sheet tensile, bending, etc, can alsoused for correct, pressing, cold extrusion andpressure molding process of plastic products andthe powder product. Main features of Hydraulicpresses machine : 1. Structure of hydraulicpresses machine adopts the computeroptimization design, the structure is simple,economical and practical. 2. Hydraulic control of hydraulic presses machine using integratedsystem, reliable operation, long service life,hydraulic impact is small, and reduce theconnecting line and leakage point, hydraulicintegrated system uses independent control unit. 3. Independent electrical controlsystem of hydraulic presses machine , reliablework, action intuitive, convenient maintenance.Scope of production: Maximum can produce 2500Thydraulic press. Our hydraulic presses areexported to India, Russia and
other countries. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
坡口機 Bevel Machine |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
本機床適用於電站、石油、化工、造船等行業中管件製造、管道安裝單位使用;是管件製作和管道施工焊接前管端坡口加工的關鍵設備。本機床由動力頭、刀盤結構、床身結構、夾具平台結構、電氣控製係統等五大部件組成。
The machine is suitable forcompanies who worked on pipe fitting forming andpipe installation in power plant, petroleumindustry, chemical industry, shipbuildingindustry, etc. It's a key machine for pipefitting forming and pipe end beveling beforewelded in pipeline construction. The machineconsists of power head, cutter structure, bedstructure, fixture platform structure,electrical control system, etc.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
我們的KGPS係列中頻感應線圈供應適用於冶煉,雖然熱,熱膨脹, Our KGPS Series ofintermediate Frequency induction coil Supply suit for smelting,though hot ,hot expansion,
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hydraulic press Machine |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pipe automatic cutting machine |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Abrasive Tool | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||